Manual Surface Grinders
Chevalier Manual Surface Grinders
Chevalier Manual Surface Grinders are precision grinding machines designed for manual operation, providing control and accuracy for surface finishing tasks. They are suitable for a variety of applications, including tool and die making, mold manufacturing, and general precision machining.
chevalier manual surface grinders
FSG-618M
FSG-618SP
FSG-618SP
- All essential castings are mode of high grade Meehanite ®cast iron that is stress relieved through annealing to eliminate internal stress.
- With the greatest stiffness and stability of the castings, this machine is suitable for both precision surface grinding and form grinding.
- The interlock between electrical cabinet door and power supply is established to ensure safe operation.
- The spring loaded type table travel stops will dampen the over travel caused by abnormal operations.
- Saddle travels on Turcite-B coated and hand scraped double V guideways.
FSG-618SP
FSG-618SP
FSG-618SP
- Table traverses on linear ball bearings and D2 hardened & ground guideways.
- Reinforced ribbed column with hardened & ground guide way system.
- Elevating & cross-feed leadscrews are hardened & ground.
- Saddle travels on Turcite-B coated and hand scraped double V guideways.
- Vertical hand wheel at waist level
- Permanently lubricated and sealed cartridge-type spindle
- Uses two pairs of class 7 (P4) angular contact ball bearings
- 2HP dynamically balanced spindle motor.
- Automatic lubrication system
- Meehanite® cast iron
- A mirror surface can be accomplished on these machines accurately and efficiently
FSG-818SP
FSG-618SP
FSG-818SP
- Table traverses on linear ball bearings and D2 hardened & ground guideways.
- Reinforced ribbed column with hardened & ground guide way system.
- Elevating & cross-feed leadscrews are hardened & ground.
- Saddle travels on Turcite-B coated and hand scraped double V guideways.
- Vertical hand wheel at waist level
- Permanently lubricated and sealed cartridge-type spindle
- Uses two pairs of class 7 (P4) angular contact ball bearings
- 2HP dynamically balanced spindle motor.
- Automatic lubrication system
- Meehanite® cast iron
- A mirror surface can be accomplished on these machines accurately and efficiently